aphrodite-engine/cmake/utils.cmake

#
# Attempt to find the python package that uses the same python executable as
# `EXECUTABLE` and is one of the `SUPPORTED_VERSIONS`.
#
macro (find_python_from_executable EXECUTABLE SUPPORTED_VERSIONS)
  file(REAL_PATH ${EXECUTABLE} EXECUTABLE)
  set(Python_EXECUTABLE ${EXECUTABLE})
  find_package(Python COMPONENTS Interpreter Development.Module Development.SABIModule)
  if (NOT Python_FOUND)
    message(FATAL_ERROR "Unable to find python matching: ${EXECUTABLE}.")
  endif()
  set(_VER "${Python_VERSION_MAJOR}.${Python_VERSION_MINOR}")
  set(_SUPPORTED_VERSIONS_LIST ${SUPPORTED_VERSIONS} ${ARGN})
  if (NOT _VER IN_LIST _SUPPORTED_VERSIONS_LIST)
    message(FATAL_ERROR
      "Python version (${_VER}) is not one of the supported versions: "
      "${_SUPPORTED_VERSIONS_LIST}.")
  endif()
  message(STATUS "Found python matching: ${EXECUTABLE}.")
endmacro()

#
# Run `EXPR` in python.  The standard output of python is stored in `OUT` and
# has trailing whitespace stripped.  If an error is encountered when running
# python, a fatal message `ERR_MSG` is issued.
#
function (run_python OUT EXPR ERR_MSG)
  execute_process(
    COMMAND
    "${Python_EXECUTABLE}" "-c" "${EXPR}"
    OUTPUT_VARIABLE PYTHON_OUT
    RESULT_VARIABLE PYTHON_ERROR_CODE
    ERROR_VARIABLE PYTHON_STDERR
    OUTPUT_STRIP_TRAILING_WHITESPACE)

  if(NOT PYTHON_ERROR_CODE EQUAL 0)
    message(FATAL_ERROR "${ERR_MSG}: ${PYTHON_STDERR}")
  endif()
  set(${OUT} ${PYTHON_OUT} PARENT_SCOPE)
endfunction()

# Run `EXPR` in python after importing `PKG`. Use the result of this to extend
# `CMAKE_PREFIX_PATH` so the torch cmake configuration can be imported.
macro (append_cmake_prefix_path PKG EXPR)
  run_python(_PREFIX_PATH
    "import ${PKG}; print(${EXPR})" "Failed to locate ${PKG} path")
  list(APPEND CMAKE_PREFIX_PATH ${_PREFIX_PATH})
endmacro()

#
# Add a target named `hipify${NAME}` that runs the hipify preprocessor on a set
# of CUDA source files. The names of the corresponding "hipified" sources are
# stored in `OUT_SRCS`.
#
function (hipify_sources_target OUT_SRCS NAME ORIG_SRCS)
  #
  # Split into C++ and non-C++ (i.e. CUDA) sources.
  #
  set(SRCS ${ORIG_SRCS})
  set(CXX_SRCS ${ORIG_SRCS})
  list(FILTER SRCS EXCLUDE REGEX "\.(cc)|(cpp)$")
  list(FILTER CXX_SRCS INCLUDE REGEX "\.(cc)|(cpp)$")

  #
  # Generate ROCm/HIP source file names from CUDA file names.
  # Since HIP files are generated code, they will appear in the build area
  # `CMAKE_CURRENT_BINARY_DIR` directory rather than the original kernels dir.
  #
  set(HIP_SRCS)
  foreach (SRC ${SRCS})
    string(REGEX REPLACE "\.cu$" "\.hip" SRC ${SRC})
    string(REGEX REPLACE "cuda" "hip" SRC ${SRC})
    list(APPEND HIP_SRCS "${CMAKE_CURRENT_BINARY_DIR}/${SRC}")
  endforeach()

  set(CSRC_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/kernels)
  add_custom_target(
    hipify${NAME}
    COMMAND ${CMAKE_SOURCE_DIR}/cmake/hipify.py -p ${CMAKE_SOURCE_DIR}/kernels -o ${CSRC_BUILD_DIR} ${SRCS}
    DEPENDS ${CMAKE_SOURCE_DIR}/cmake/hipify.py ${SRCS}
    BYPRODUCTS ${HIP_SRCS}
    COMMENT "Running hipify on ${NAME} extension source files.")

  # Swap out original extension sources with hipified sources.
  list(APPEND HIP_SRCS ${CXX_SRCS})
  set(${OUT_SRCS} ${HIP_SRCS} PARENT_SCOPE)
endfunction()

#
# Get additional GPU compiler flags from torch.
#
function (get_torch_gpu_compiler_flags OUT_GPU_FLAGS GPU_LANG)
  if (${GPU_LANG} STREQUAL "CUDA")
    #
    # Get common NVCC flags from torch.
    #
    run_python(GPU_FLAGS
      "from torch.utils.cpp_extension import COMMON_NVCC_FLAGS; print(';'.join(COMMON_NVCC_FLAGS))"
      "Failed to determine torch nvcc compiler flags")

    if (CUDA_VERSION VERSION_GREATER_EQUAL 11.8)
      list(APPEND GPU_FLAGS "-DENABLE_FP8")
    endif()
    if (CUDA_VERSION VERSION_GREATER_EQUAL 12.0)
      list(REMOVE_ITEM GPU_FLAGS
        "-D__CUDA_NO_HALF_OPERATORS__"
        "-D__CUDA_NO_HALF_CONVERSIONS__"
        "-D__CUDA_NO_BFLOAT16_CONVERSIONS__"
        "-D__CUDA_NO_HALF2_OPERATORS__")
    endif()

  elseif(${GPU_LANG} STREQUAL "HIP")
    #
    # Get common HIP/HIPCC flags from torch.
    #
    run_python(GPU_FLAGS
      "import torch.utils.cpp_extension as t; print(';'.join(t.COMMON_HIP_FLAGS + t.COMMON_HIPCC_FLAGS))"
      "Failed to determine torch nvcc compiler flags")

    list(APPEND GPU_FLAGS
      "-DUSE_ROCM"
      "-DENABLE_FP8"
      "-U__HIP_NO_HALF_CONVERSIONS__"
      "-U__HIP_NO_HALF_OPERATORS__"
      "-fno-gpu-rdc")

  endif()
  set(${OUT_GPU_FLAGS} ${GPU_FLAGS} PARENT_SCOPE)
endfunction()

# Macro for converting a `gencode` version number to a cmake version number.
macro(string_to_ver OUT_VER IN_STR)
  string(REGEX REPLACE "\([0-9]+\)\([0-9]\)" "\\1.\\2" ${OUT_VER} ${IN_STR})
endmacro()

#
# Override the GPU architectures detected by cmake/torch and filter them by
# `GPU_SUPPORTED_ARCHES`. Sets the final set of architectures in
# `GPU_ARCHES`.
#
# Note: this is defined as a macro since it updates `CMAKE_CUDA_FLAGS`.
#
macro(override_gpu_arches GPU_ARCHES GPU_LANG GPU_SUPPORTED_ARCHES)
  set(_GPU_SUPPORTED_ARCHES_LIST ${GPU_SUPPORTED_ARCHES} ${ARGN})
  message(STATUS "${GPU_LANG} supported arches: ${_GPU_SUPPORTED_ARCHES_LIST}")

  if (${GPU_LANG} STREQUAL "HIP")
    #
    # `GPU_ARCHES` controls the `--offload-arch` flags.
    # `CMAKE_HIP_ARCHITECTURES` is set up by torch and can be controlled
    # via the `PYTORCH_ROCM_ARCH` env variable.
    #

    #
    # Find the intersection of the supported + detected architectures to
    # set the module architecture flags.
    #

    set(APHRODITE_ROCM_SUPPORTED_ARCHS "gfx906;gfx908;gfx90a;gfx940;gfx941;gfx942;gfx1030;gfx1100")
    set(${GPU_ARCHES})
    foreach (_ARCH ${APHRODITE_ROCM_SUPPORTED_ARCHS})
      if (_ARCH IN_LIST _GPU_SUPPORTED_ARCHES_LIST)
        list(APPEND ${GPU_ARCHES} ${_ARCH})
      endif()
    endforeach()

    if(NOT ${GPU_ARCHES})
      message(FATAL_ERROR
        "None of the detected ROCm architectures: ${CMAKE_HIP_ARCHITECTURES} is"
        " supported. Supported ROCm architectures are: ${_GPU_SUPPORTED_ARCHES_LIST}.")
    endif()

  elseif(${GPU_LANG} STREQUAL "CUDA")
    #
    # Setup/process CUDA arch flags.
    #
    # The torch cmake setup hardcodes the detected architecture flags in
    # `CMAKE_CUDA_FLAGS`.  Since `CMAKE_CUDA_FLAGS` is a "global" variable, it
    # can't modified on a per-target basis, e.g. for the `punica` extension.
    # So, all the `-gencode` flags need to be extracted and removed from
    # `CMAKE_CUDA_FLAGS` for processing so they can be passed by another method.
    # Since it's not possible to use `target_compiler_options` for adding target
    # specific `-gencode` arguments, the target's `CUDA_ARCHITECTURES` property
    # must be used instead.  This requires repackaging the architecture flags
    # into a format that cmake expects for `CUDA_ARCHITECTURES`.
    #
    # This is a bit fragile in that it depends on torch using `-gencode` as opposed
    # to one of the other nvcc options to specify architectures.
    #
    # Note: torch uses the `TORCH_CUDA_ARCH_LIST` environment variable to override
    # detected architectures.
    #
    message(DEBUG "initial CMAKE_CUDA_FLAGS: ${CMAKE_CUDA_FLAGS}")

    # Extract all `-gencode` flags from `CMAKE_CUDA_FLAGS`
    string(REGEX MATCHALL "-gencode arch=[^ ]+" _CUDA_ARCH_FLAGS
      ${CMAKE_CUDA_FLAGS})

    # Remove all `-gencode` flags from `CMAKE_CUDA_FLAGS` since they will be modified
    # and passed back via the `CUDA_ARCHITECTURES` property.
    string(REGEX REPLACE "-gencode arch=[^ ]+ *" "" CMAKE_CUDA_FLAGS
      ${CMAKE_CUDA_FLAGS})

    # If this error is triggered, it might mean that torch has changed how it sets
    # up nvcc architecture code generation flags.
    if (NOT _CUDA_ARCH_FLAGS)
      message(FATAL_ERROR
        "Could not find any architecture related code generation flags in "
        "CMAKE_CUDA_FLAGS. (${CMAKE_CUDA_FLAGS})")
    endif()

    message(DEBUG "final CMAKE_CUDA_FLAGS: ${CMAKE_CUDA_FLAGS}")
    message(DEBUG "arch flags: ${_CUDA_ARCH_FLAGS}")

    # Initialize the architecture lists to empty.
    set(${GPU_ARCHES})

    # Process each `gencode` flag.
    foreach(_ARCH ${_CUDA_ARCH_FLAGS})
      # For each flag, extract the version number and whether it refers to PTX
      # or native code.
      # Note: if a regex matches then `CMAKE_MATCH_1` holds the binding
      # for that match.

      string(REGEX MATCH "arch=compute_\([0-9]+a?\)" _COMPUTE ${_ARCH})
      if (_COMPUTE)
        set(_COMPUTE ${CMAKE_MATCH_1})
      endif()

      string(REGEX MATCH "code=sm_\([0-9]+a?\)" _SM ${_ARCH})
      if (_SM)
        set(_SM ${CMAKE_MATCH_1})
      endif()

      string(REGEX MATCH "code=compute_\([0-9]+a?\)" _CODE ${_ARCH})
      if (_CODE)
        set(_CODE ${CMAKE_MATCH_1})
      endif()

      # Make sure the virtual architecture can be matched.
      if (NOT _COMPUTE)
        message(FATAL_ERROR
          "Could not determine virtual architecture from: ${_ARCH}.")
      endif()

      # One of sm_ or compute_ must exist.
      if ((NOT _SM) AND (NOT _CODE))
        message(FATAL_ERROR
          "Could not determine a codegen architecture from: ${_ARCH}.")
      endif()

      if (_SM)
        # -real suffix let CMake to only generate elf code for the kernels.
        # we want this, otherwise the added ptx (default) will increase binary size.
        set(_VIRT "-real")
        set(_CODE_ARCH ${_SM})
      else()
        # -virtual suffix let CMake to generate ptx code for the kernels.
        set(_VIRT "-virtual")
        set(_CODE_ARCH ${_CODE})
      endif()

      # Check if the current version is in the supported arch list.
      string_to_ver(_CODE_VER ${_CODE_ARCH})
      if (NOT _CODE_VER IN_LIST _GPU_SUPPORTED_ARCHES_LIST)
        message(STATUS "discarding unsupported CUDA arch ${_VER}.")
        continue()
      endif()

      # Add it to the arch list.
      list(APPEND ${GPU_ARCHES} "${_CODE_ARCH}${_VIRT}")
    endforeach()
  endif()
  message(STATUS "${GPU_LANG} target arches: ${${GPU_ARCHES}}")
endmacro()

#
# Define a target named `GPU_MOD_NAME` for a single extension. The
# arguments are:
#
# DESTINATION <dest>         - Module destination directory.
# LANGUAGE <lang>            - The GPU language for this module, e.g CUDA, HIP,
#                              etc.
# SOURCES <sources>          - List of source files relative to CMakeLists.txt
#                              directory.
#
# Optional arguments:
#
# ARCHITECTURES <arches>     - A list of target GPU architectures in cmake
#                              format.
#                              Refer `CMAKE_CUDA_ARCHITECTURES` documentation
#                              and `CMAKE_HIP_ARCHITECTURES` for more info.
#                              ARCHITECTURES will use cmake's defaults if
#                              not provided.
# COMPILE_FLAGS <flags>      - Extra compiler flags passed to NVCC/hip.
# INCLUDE_DIRECTORIES <dirs> - Extra include directories.
# LIBRARIES <libraries>      - Extra link libraries.
# WITH_SOABI                 - Generate library with python SOABI suffix name.
# USE_SABI <version>         - Use python stable api <version>
#
# Note: optimization level/debug info is set via cmake build type.
#
function (define_gpu_extension_target GPU_MOD_NAME)
  cmake_parse_arguments(PARSE_ARGV 1
    GPU
    "WITH_SOABI"
    "DESTINATION;LANGUAGE;USE_SABI"
    "SOURCES;ARCHITECTURES;COMPILE_FLAGS;INCLUDE_DIRECTORIES;LIBRARIES")

  # Add hipify preprocessing step when building with HIP/ROCm.
  if (GPU_LANGUAGE STREQUAL "HIP")
    hipify_sources_target(GPU_SOURCES ${GPU_MOD_NAME} "${GPU_SOURCES}")
  endif()

  if (GPU_WITH_SOABI)
    set(GPU_WITH_SOABI WITH_SOABI)
  else()
    set(GPU_WITH_SOABI)
  endif()

  if (GPU_USE_SABI)
    Python_add_library(${GPU_MOD_NAME} MODULE USE_SABI ${GPU_USE_SABI} ${GPU_WITH_SOABI} "${GPU_SOURCES}")
  else()
    Python_add_library(${GPU_MOD_NAME} MODULE ${GPU_WITH_SOABI} "${GPU_SOURCES}")
  endif()

  if (GPU_LANGUAGE STREQUAL "HIP")
    # Make this target dependent on the hipify preprocessor step.
    add_dependencies(${GPU_MOD_NAME} hipify${GPU_MOD_NAME})
  endif()

  if (GPU_ARCHITECTURES)
    set_target_properties(${GPU_MOD_NAME} PROPERTIES
      ${GPU_LANGUAGE}_ARCHITECTURES "${GPU_ARCHITECTURES}")
  endif()

  set_property(TARGET ${GPU_MOD_NAME} PROPERTY CXX_STANDARD 20)

  target_compile_options(${GPU_MOD_NAME} PRIVATE
    $<$<COMPILE_LANGUAGE:${GPU_LANGUAGE}>:${GPU_COMPILE_FLAGS}>)

  target_compile_definitions(${GPU_MOD_NAME} PRIVATE
    "-DTORCH_EXTENSION_NAME=${GPU_MOD_NAME}")

  target_include_directories(${GPU_MOD_NAME} PRIVATE kernels
    ${GPU_INCLUDE_DIRECTORIES})

  target_link_libraries(${GPU_MOD_NAME} PRIVATE torch ${torch_python_LIBRARY}
    ${GPU_LIBRARIES})

  # Don't use `TORCH_LIBRARIES` for CUDA since it pulls in a bunch of
  # dependencies that are not necessary and may not be installed.
  if (GPU_LANGUAGE STREQUAL "CUDA")
    target_link_libraries(${GPU_MOD_NAME} PRIVATE ${CUDA_CUDA_LIB}
      ${CUDA_LIBRARIES})
  else()
    target_link_libraries(${GPU_MOD_NAME} PRIVATE ${TORCH_LIBRARIES})
  endif()

  install(TARGETS ${GPU_MOD_NAME} LIBRARY DESTINATION ${GPU_DESTINATION})
endfunction()